SereneLife SLGM3A User Manual Download Page 3

www.SereneLifeHome.com

3

If the mattress is used indoors:

• Remove furniture and other objects that are near the mattress.
• Make sure there are no lamps and the like hanging directly over the mattress.

If the mattress is used outdoors:

• Always place the mattress in soft areas/surfaces with (grass, sand, etc.) around  

  the mattress.

• Examine the area for sharp and hard objects and remove them before using the  

  mattress.

• Avoid trees, hanging branches, electrical wires, cords, bushes, walls, fences,    

  swimming pools and the like nearby.

• When installing in sand, place the mattress on a non-woven fabric or similar to  

  avoid damaging the mattress.

• Only use the mattress when it is completely dry. Do not use the 

Inflatable    

  Training Air Mat

 in the rain. While inflating the equipment, electrocution may  

  occur and also the surface will be slippery which can cause injuries.
• Never leave the mattress in direct sunlight or at high temperatures. Always    

  unpack the 

Inflatable Training Air Mat

 after use.

• The mattress becomes harder when exposed to heat, which might cause over  

  pressure. if the mattress punctures. It is recommended to regulate the air pressure  
  in the mattress to the minimum when not in use.

• The mattress loses equivalent pressure when the surrounding temperature    

  drops, and must therefore regulate the pressure more often.

• Do not wear shoes while on an 

Inflatable Training Air Mat

 for they may  

 

  damage the surface. Use any gym mat shoes or socks with rubber coating on the  
  bottom.

• Empty the pockets for items before exercising on the mattress.
• Never wear sharp objects (jewelry, watches, keys, etc.) or near the mattress.
• Never land near the valve (approx. 20 cm). Landing near the valve opening can  

  create overpressure and valve overload.

• If the mattress is to be moved, lift it in the handles. Avoid unnecessary wear:    
  never drag the mattress over the floor/ground.
• Never use a faulty mattress. Make sure to repair the damage before re-using the  

  mattress.

Summary of Contents for SLGM3A











Reviews: