SereneLife SLFTRD50, User Manual

Page: 13 / 21

www.SereneLifeHome.com
13
4.2. Speed Plus or Minus keys
After the treadmill starts, it can be used to adjust the speed, step 0.1Km/times,
and automatically continue to increase or decrease when holding for more than 2
seconds.
5. Display Function
5.1. Step Value Display Window
Displays the current value of moves. When the value of moves reaches 9999 steps.
5.2. Time/Speed Display
Displays the current running time and speed value. The window automatically
switches the display.
5.3. Calories / Distance Display
Display calorie accumulation and distance value of current exercise.
Window automatically switches display.
5.4. Calorie standard value is 30 kcal/kilometer
。
5.5. Acceleration is 0.1Km/S, deceleration is 0.1Km/S.
6. Error Message Code
ERROR
CODE
FAULT
DESCRIPTION
SOLUTION
ER 1
ER 3
ER 4
The board did
not receive
a signal
Overvoltage
protection
Overcurrent
protection
1. Check for loose, dropped or damaged
communications lines.
2. Check or replace the electronic watch board.
3. Check or replace the controller.
1. Please check if the voltage on the power supply line is
normal: AC 200-240V
2. Check or replace the controller.
3. Check or replace the motor.
1 Check for overload.
2. Check if the mechanical moving parts are stuck.
3. Check if there is a lack of release agent. If there is a
lack of release agent, the friction between the running
belt and the running plate will increase.
4. Check the running plate for serious wear.
5. Check the running belt for serious wear.
6. Check if the motor cable is short-circuited.
7. Check or replace the controller.
8. Check or replace the motor.