www.SereneLifeHome.com
C.
E.
F.
G.
H.
J.
K.
•
USE
1. Pull out the flush valve to use the toilet. (Fig 4)
2. After use, flush the toilet by moving the piston pump up and down or by pressing the orange flush
button for seconds when water supply is connected. (Fig 5)
3. Close the flush valve after flushing. (Fig 6)
EMPTYING
The waste holding tank must be emptied when the indicator turns red. It is advisable to empty the
waste holding tank earlier.
Note!
Do not allow the waste holding tank to become too full.
1. Make sure that the flush valve is closed. Pull the waste tank out from the toilet. (Fig 7)
2. Carry the holding tank to a normal toilet or to a legal waste disposal site.
3. Remove the emptying spout cap. Empty the waste. (Fig 8)
4. After emptying, flush the waste holding tank and clean the flush valve thoroughly with water.
Slide the waste tank back into the toilet. (Fig 9)
4
5
6
7
8
9