www.SereneLifeHome.com
5
GETTING STARTED
SUP BOARD AIR PUMP
Your SUP Board comes with a high pressure pump. This pressure pump, pumps low volume of air with each pumping motion.
It takes longer to fill the board with air, but allows the board to reach a higher air pressure. This is good for achieving maximum
performance from the board. The SUP board air pump is also lubricated with oil. To ensure the life of the air pump, make
sure the pump is fully lubri-cated before and during each use. To lubricate the pump, simply open the top and place a few
drops of oil/grease on the gasket and tube. Take a second to clean the air filter, also located inside the top of the pump.
INSTALLING THE FIN
Make sure the center fin box is clean and free of debris.
Put fin base into fin
box from the wide inlet.
1
2
3
4
5
Push the fin down
Turn the screw to secure
fin firmly.
The fin base will
slide to the end of
box at the same time.
