NOTE:
As a confirmation, the main clock separator will be differed:
“MASTER” mode – square shaped “SUB” (remote) mode – triangle
shaped.
System Reset
EN
Copyright 2020 Serene Group, Inc. All rights reserved.
20.
System Default on CA-360Q is Master Mode
(M)
.
To change the system mode, it must go through a system reset.
All CA-360Q settings and paired accessories will be cleared.
A two level confirmation is needed:
The 1
st
level screen checks if still want to proceed,
Use or buttons to highlight the choice, press
MODE
to select:
Press + buttons for 2 seconds to initiate.
1.
A 2nd screen will appear, select the
MAIN
or
SUB
system mode.
Use or button to highlight, and press MODE to confirm.
Press
RESET
will select the default selection “
MAIN
”. (Master)
2.
System reset is complete. All previous accessories are cleared.
2.
Note:
Pressing
RESET
at this time can cancel operation.
