Serene S2088 Operating Instructions Download Page 2

 

Serene S2088

 

2

   

Wall + Bathroom Fan Heater    Rev 2017 

Introduction 

 

Designed for easy installation, your Serene S2088 Wall & Bathroom Fan Heater includes a metal wall-mounting hinged 
bracket 

for faster and easier installation. This all new model wall and bathroom fan heater with ‘Airslip‘

 technology has 

been designed to cover the footprint of previously available SKOPE models. 

 

Safety Information 

 

 

When  using  any  electrical  appliance,  safety  precautions  should  always  be  observed.  Read  these  instructions 
carefully, and retain for future reference. For service, contact your nearest authorised service agent. 

 

Under no circumstances should an unauthorized person open the heater to adjust the thermostat. 

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been  given  supervision  or  instruction 
concerning use of the appliance by a person responsible for their safety. 

 

Children should be supervised to ensure that they do not play with the appliance. Do NOT use this appliance 
other than for its intended use. 

 

Use this appliance only with the voltage specified on the rating label. 

 

Be very careful not to touch hot surfaces or moving parts. 

 

Do NOT cover the grilles or place any object or material up against the unit as this may block the entry or 
exhaust of airflow. 

 

Do NOT probe any opening to remove fluff. To ensure trouble-free performance, it is recommended that the unit be 
isolated from the power supply and a vacuum cleaner used to remove dust and fluff from the inlet and outlet 
grilles on a regular basis. 

 

Installation  must  be  performed  by  a  licensed  electrician.

 

Regulations  require  that  electrical  work  be 

carried out only by properly qualified person. For your own safety and that of others, ensure this is done. 

 

Do NOT allow the supply cord to come into contact with heated surfaces during operation. 

 

If the supply cord becomes damaged, it must be replaced by a qualified person in order to avoid a hazard. 

 

Installation 

 

The installation must be performed by a licensed electrician 
 
This appliance MUST be installed in accordance with relevant wiring rules and regulations which cover installation of 
appliances and accessories in damp situations, such as bathrooms, showers, laundries and other areas, fixed water 
containers (in Australia and New Zealand - AS/NZS 3000:2000 Wiring Rules 
A suitable disconnection device (acting in all supplies) MUST be incorporated in the supply wiring 
 

Distances 

 
The heater must be mounted a minimum distance of: 

 

1800mm from floor level 

 

200mmm below the ceiling 

 

250mm from adjacent walls 

 

500mm between the heater and any objects heated below it. 

 

 

 

 

 

 

 

 

 

Reviews: