| 5
Control Functions:
1
POWER BUTTON
Touch to
START
or
STOP
the heater.
2
SPEED INDICATOR
To control the fan speed touch the SPEED button
repeatedly until the desired fan speed is selected
3
FAN ONLY INDICATOR
To set the heater to Fan Only setting, press the
FAN symbol until the Green ‘Fan Only’ indicator is lit.
4
FREEZE GUARD INDICATOR
When the heater is set to the Freeze Guard setting, it will
switch on if the temperature detected by the electronic
controller falls below 5°C. To set the heater to Freeze
Guard setting, Press the ‘freeze symbol’ on the left side of the
control panel until the Red Freeze Guard indicator is lit
5
SELECTOR
-
BUTTON
Touch to
DECRESE
the temperature setting.
SELECTOR
+
BUTTON
Touch to
INCREASE
the temperature setting.
6
TAMPER LOCK BUTTON
Activating the Tamper Lock button will ensure that the
temperature setting cannot be changed, yet the heater is
still able to be turned on or off.
To activate the Tamper Lock, hold down the button for
approximately 3 seconds, until you hear a beep and the
Tamper Lock red indicator is lit.
To deactivate this function, repeat the operation.
