2
4. The Keypad shall then wipe any knowledge of the previous network and other configuration parameters and begin searching for a new
network(Auto Joining State).
Mount the keypad bracket to the wall in the desired location using the included mounting screws and anchors (Figure 4). Align the keypad to
wall mount bracket and snap keypad onto bracket. (Figure 5)
Arm Away Button
Press this button and enter your 4 digit security code to arm in away mode.
For Example: Press 1,2,3,4 digit and press “Arm away” button.
Once the Arm has successfully. The beeper will “beep” on 1 second then off.
Arm Night Button
Press this button and enter your 4 digit security code to arm in night mode.
For Example: Press 1,2,3,4 digit and press “Arm Night” button.
Once the Arm has successfully. The beeper will “beep” on 1 second then off.
Disarm Button
Press this button and enter your 4 digit security code to disarm mode.
For Example: Press 1,2,3,4 digit and press “Disarm” button.
Once the Arm has successfully. The beeper will “beep” on 1 second then off.
1.
The Network/pairing LED and low battery LED will stay off during the normal operation.
2.
The sensor is equipped with a tamper switch. If the cover of sensor is removed, the sensor will send an alarm to the home controller or
security system.
3.
Proximity Detection: The keypad is able to detect the user’s presence within 7 cm (Max). Once detected the keypad will awake and
backlit illuminate.
4.
Lithium batteries do not charge
5.
If enter wrong digit security code, the beeper will “beep” “beep” 2 times.
6.
Keypad backlit keep on 5 second once proximity sensor detect user.
To ensure that your system continues to functioning as intended, you must test your system weekly. Please contact your security monitoring
company for instructions on how to test your system
Normal Function
Weekly Testing
Certification
Operation
Keypad Bracket Instruction
Figure 4
Figure 5
