Soundbar Front‐Panel Controls
Power
Button
To turn the Soundbar on, press the Power button and the green LED will turn on and
remain solid. To put the Soundbar into Standby Mode, press the Power button and the
green LED will turn off. Pressing the programmed Dish Network remote Power button will
also place the device in Standby Mode. To take the Soundbar off of Standby Mode, you can
either press the Power button on the Soundbar, or the Power button on the programmed
Dish Network remote.
EQ
Button
Use this button to adjust the EQ settings of your Soundbar. As you push the button, it will
toggle between 2 preset EQ settings. The Music setting provides full range sound designed
for the best music listening experience. The Video setting provides full range sound with
an emphasis on the higher range to enhance video viewing.
Input
Button
This button switches between the inputs connected on the back of the Soundbar: Aux and
Optical. It also allows for a Bluetooth® input, signified by “BT”. As you press the Input
button, it toggles between each input. When Aux is active, the purple LED remains solid.
When the Optical is active, the yellow LED remains solid. When BT (Bluetooth®) is active,
the blue LED remains solid.
Mute
Button
Press the Mute button to mute the Soundbar. The LED will flash slowly when the speaker is
muted. Press the Mute button again or adjust the volume with either of the Volume buttons
to restore sound.
Volume
Up/
Down
Buttons
Press the VOL+ button to increase the sound volume of the Soundbar. Press the VOL‐ to
decrease the sound of the Soundbar. When maximum volume is reached the LED will flash
quickly several times.
