Installation and Operation Guide
7
Controls, connectors and
components
Refer to the illustration for the location of the following controls,
connectors and buttons.
(1) Handles
(2) Status indicators
(3) Power switch
(4) GPS antenna connector
(5) Accessory connector
(6) Ethernet (RJ45) connector
(7) AC power input connector with fuse holder
(8) Grounding point
(9) Transmit antenna connector (N-type)
(10) Fan
(11) Heat sink
(12) Receive antenna connector (BNC)
(13) DC connector
Status indicators
The Repeater has a series of LEDs on the front panel that
indicate various operational states.
LED
Description
TX-A
Indicates slot 1 is transmitting
RX-A
Indicates slot 1 is receiving
TX-B
Indicates slot 2 is transmitting.
RX-B
Indicates slot 2 is receiving
Repeater mode. When illuminated, the repeater is
active. When the repeater is inactive, the LED is off.
Analogue mode. For analogue or mixed signals the
LED flashes when active. When inactive the LED is
off.
Digital mode. For digital or mixed the LED flashes
when active. When non-active the LED is off.
Alarm mode. Illuminates when there is a problem
with the repeater. See Basic Operation.
Illuminates when the repeater is switched on.
