SEPTENTRIO PolaRx5TR, Reference Manual

Page: 42 / 512

1 How To...
1.23 Download Log Files from the Receiver
There are different ways to download or delete files from the internal disk:
1. Using RxControl. Select
Logging > Download Internal Files
to download files to your com-
puter, and
Logging > Remove Internal File
to remove a file from the internal disk.
Figure 1-2:
Download Internal Files from RxControl.
2. Using FTP or SFTP. The hostname or fixed IP address is defined as explained in
section 1.1.3. For example, if your receiver’s hostname is
polarx5tr-1234567
,
you can type the following URL in your preferred web browser to open a session as
anonymous user:
ftp://polarx5tr-1234567
User authentication for SFTP access can be done by entering a password or us-
ing an ssh public key, as defined with the
setUserAccessLevel
command.
By default, anonymous users can download and delete files. This can be changed as
explained in section 1.31.
3. Using
rsync
. If an
rsync
client is available on your computer, you can use
rsync
to download files or directories from the receiver. The hostname or IP address is the
same as for (S)FTP, see above.
For example, to download the contents of the
LOG1_TST/16134
folder of the internal
disk (DSK1) to the current folder on your local computer, you could invoke
rsync
as
follows:
rsync -r anonymous@polarx5tr-1234567:DSK1/SSN/LOG1_TST/16134 .
when prompted for a password, just press the enter key as no password is required for
42