SEPTENTRIO PolaRx5S, User Manual

Page: 45 / 107

5.2. CONF I GUR I NG RXLOGGER
The ‘ ssss ’ fi eld (the station name designator) can be freely chosen by selecting ‘ Force the
MarkerName to: ’ . I n the example shown in Figure 5-3, the ‘ ssss ’ fi eld has been set to ‘ SEPT ’ .
Figure 5-3: Specifying the station name designator as ‘ SEPT ’
Figure 5-4 shows an example of data fi les logged on February 26, 2016. The fi les with the
‘
.16_
’ extension are SBF fi les containing the raw data from the receiver. The fi les with
the ‘
.16_.ismr
’ extension are the post-processed fi les containing the scintillation indices.
Section 5.2.4 describes how to con fi gure post-processing actions.
Figure 5-4: An example of hourly SBF and I SMR fi les logged on day 57 in 2016
45