SEPTENTRIO PolaRx5S, User Manual

Page: 33 / 107

4.5. HOW TO LOG DATA
Figure 4-22: Select ‘ External ’ from the drop-down list to log data to an external
memory device
4.5.3 How to FTP push logged data to a remote
location
SBF, R I NEX and B I NEX fi les can also be automatically sent to a remote FTP server (FTP push).
A di ff erent FTP server can be con fi gured for each logging session and, SBF and R I NEX fi les
logged in the same session can be sent to di ff erent servers.
The FTP server settings can be entered in the ‘ Edit Session ’ window, after con fi guring SBF or
R I NEX logging, as shown in Figure 4-23. FTP push will create the folder ‘ data ’ on the remote
server if it does not yet exist. I f fi le transfer fails, the receiver will retry after the ‘ Retry I nterval ’
which has been selected as 15 minutes in this example.
Figure 4-23: Con fi gure pushing of R I NEX fi les to an external FTP server
You can check that the FTP server credentials are correct by clicking on the ‘ Test ’ button.
This will push a small test fi le to the remote folder and then delete it. The receiver reports
whether or not the fi le was successfully sent and deleted as shown in Figure 4-24. I f the
33