CHAPTER 3. CONF
I
GUR
I
NG THE ASTERX SB3
Step 3a: Configure the output of differential corrections using
an NTRIP Caster
The AsteRx SB3 includes a built-in NTR
I
P Caster that makes correction data from the AsteRx
SB3 available to up to 10 NTR
I
P clients over the internet. The caster supports up to three
mount points and can also broadcast correction data from a remote NTR
I
P server.
All settings relating to the AsteRx SB3 NTR
I
P Caster can be con
fi
gured on the
NTRIP Caster
window from the
Communication
menu.
Define a new mount point
Figure 3-20:
The con
fi
guration sequence for de
fi
ning a new mount point
I
n the NTR
I
P Caster window, click on the
Settings
tab.
I
n the General Settings
fi
eld, enable the NTR
I
P Caster and select the
I
P port over which you
wish to send correction data: the default port is 2101.
Click on
New mount point
as indicated in Figure 3-20. Select
Yes
to enable the mount
point and give it a name. This is the name that will appear in the caster source table. Up to
3 mount points can be de
fi
ned each with a di
ff
erent name. You can also select the type of
Client authentication
for the mount point:
none
- any client can connect without logging
in or,
basic
- clients have to login with a username and password.
By default, the
fi
eld
Allow external server
is set to
No
. By setting
Allow external server
to
Yes
the mount point can receive a stream from a remote NTR
I
P server.
23
Summary of Contents for AsteRx SB3
Page 1: ...AsteRx SB3 User Manual ...
