CHAPTER 8. RECE
I
VER ADM
I
N
I
STRAT
I
ON OPERAT
I
ONS
8.4 How to change IP settings of the AsteRx SB
Sx
The
I
P settings of the AsteRx SB Sx can be con
fi
gured on the
Ethernet
window of the Web
I
nterface. By default, the AsteRx SB Sx is con
fi
gured to use DHCP to obtain an
I
P address
but, a static
I
P address can also be con
fi
gured as shown in Figure 8-8. The
lif,ipparameters
command shows the current ip con
fi
guration available and can be helpful for debugging
network issues.
I
n Static mode, the receiver will not attempt to request an address via DHCP but will use the
speci
fi
ed
I
P address, netmask, gateway, domain name and DNS. DNS1 is the primary DNS,
and DNS2 is the backup DNS.
I
n DHCP mode, the arguments
I
P, Netmask, Gateway, Domain,
DNS1, and DNS2 are ignored.
Figure 8-8:
Con
fi
guring a static
I
P address
The new
I
P address should now appear in the
Ethernet Status
fi
eld as shown in Figure 8-9.
Figure 8-9:
TCP/
I
P settings
64
Summary of Contents for AsteRx SB Sx
Page 1: ...AsteRx SB Sx User Manual ...
