CHAPTER 4. COMMON RECE
I
VER OPERAT
I
ONS
Step 2: Configuring a logging session
To de
fi
ne a new logging session, press
New NMEA Stream
or
New SBF Stream
as shown in
Figure 4-13.
Figure 4-13:
De
fi
ning a new logging session
You can then follow the sequence of steps shown in Figure 4-14, selecting the various
con
fi
guration settings for the logging session.
I
n the
Edit SBF Stream
window, the messages
required for R
I
NEX generation have been selected as well as those useful for the Support
department for diagnosing problems. SBF messages can also be selected individually.
I
n
the
SBF Logging Parameters
fi
eld you can select the naming convention. The
IGS
options
names
fi
les according to
I
GS convention but
fi
les can also be freely named using either
Filename
or
Incremental
options. After you have
fi
nished con
fi
guring the log session, do
not forget to enable logging and press Ok.
29
