CHAPTER 4. CONFIGURING THE ALTUS NR3 AS A ROVER
Figure 4-9:
Enter the TCP/IP address and port number of the connection
Step 3: Configure the input of differential corrections
On the ‘Corrections Input’ tab, you can select the communication port and the RTCM stream
expected as input as shown in Figure 4-10. The default setting is ‘auto’ which will detect
automatically the format of the incoming differential correction stream. You can specify
explicitly the format using the drop-down list.
Figure 4-10:
Con
fi
gure the rover receiver to listen for differential correction
output from the base station
Step 4: Monitor the incoming stream
In the rover unit, the widget in the
‘
Corrections/Corrections input
’
menu should show the IPR
connection accepting corrections. Similarly, the base station widget will show data output
from the receiver. If no connection is visible please verify the con
fi
guration making sure that
the IP address/port of the base are properly used in the rover con
fi
guration. If you continue
having problems, please contact your mobile network provider.
34
Summary of Contents for ALTUS NR3
Page 1: ...Altus NR3 User Manual ...