Soluciones y Tecnologías de Control Embebido S.A.P.I. de C.V.
www.sepradel.com [email protected] +52 1 833-389-4054
11
Equipment Configuration and Control from Touch Screen
When energizing the DG-3O1I-17 equipment, its inputs and outputs will be automatically
configured with the last configuration used. When turning on the equipment, the home screen
similar to the one shown in the following figure will appear on the touchscreen.
Fig. 10. Delay generator home or main screen
From the home screen you have access to the configuration of the three output channels or
"DIGITAL OUTPUTS", called "A", "B" and "C" and which correspond to the BNC connectors marked
with the same name on the panel front of the equipment, see Fig. 1 on page 1. Likewise, the touch
button called “INPUT” allows access to the input channel parameter configuration window.
The area marked "ZONE TO CUSTOMIZE YOUR LOGO, IMAGE, ETC." is a graphic area for the
user to locate the logo of your company or institution or other relevant information. For example,
the following image shows this personalized area according to the requirements of the laser
laboratory of the La Plata Optical Center
Fig. 11. Home screen with custom zone
4
