41
10.2 IP Router PING Test Method
PING Test through router in the PC shows whether PC is normally connected to IP router or not. You
must check if the IP address of your PC is normal before PING Test.
To perform a PING Test, run MS-DOS in Win98/ME, while Command Prompt in Windows 2000/XP.
To do this, click the
“
Start
”
button at the lower left on the Windows screen and select
“
Run
”
.
In the Open dialog box, enter
“
command
”
in case of Windows 98/ME, while
“
cmd
”
in Windows
2000/XP, and then click OK button to run MS-DOS or Command Prompt.
<Run
“
command
”
or
“
cmd
”
>
Enter
“
ping 192.168.1.1
”
command in MS-DOS or the Command Prompt window.
<Running the Ping 192.168.1.1 command and its result >
If four messages
“
Reply from
…
.
”
appear as shown in the above figure, you can verify normal
connection between IP router and PC so that there may be no problem in communication.