F1-110 MANUAL VER 1.0.3
10
CHAPTER 4: GETTING STARTED
HOW TO INSTALL F1-110
Below is an overview of the F1-110 installation procedures
(For more detail please refer to Chapter 5 - Hardware Installation.).
(1) Insert a SD memory card into the SD slot.
(2) Connect F1-110 to a TV set or monitor.
(3) Connect camera to F1-110
(4) Connect optional accessories (sensors and alarm-out device)
(5) Connect the power input.
(6) Start monitoring and recording.
General Operating Advice:
Make sure that a SD memory card is inserted and two cameras are properly connected.
(Refer to Chapter 5 -Hardware Installation)
The SD memory card must be formatted (Refer to Chapter 5 – SD Memory card
Installation.) Otherwise, F1-110 may not recognize the SD Memory.
F1-110 offers you the flexibility to choose a recording frame rate (maximum rate: 30fps /
NTSC, 25fps / PAL). The faster the frame rate is, more natural video image output
appears from recorded files. However, it requires more SD memory card capacity. You
may reduce the frame rate (minimum rate: 1 frame per second) to fit longer recording
sessions in consideration of your SD memory card capacity.
The default values of F1-110 for recording are set up at 30fps (Camera 1)/10fps (Camera
2) with High video quality.
If shock sensor is triggered while car is parked, F1-110 wakes up on ‘parking mode’ and
records accordingly.
If NTSC and PAL cameras are connected together, F1-110 recognizes this as ‘video loss’.
