SEON Trooper TR4, Installation And User Manual

Page: 56 / 90

Configuring the DVR
3–22 700-0035 R004
3.2.7.1. Enabling the Alarm Buzzer, Alarm-in, Disk Full, and Video Loss
The DVR has a built-in alarm buzzer that can be activated under certain warning
or alarm conditions. See Figure 3-13.
To enable the alarm buzzer:
1. Set the Buzzer Enable to
ON
to enable the alarm buzzer.
Buzzer Enable controls the function of Alarm-in, Disk Full, and Video Loss.
For example, if both Buzzer Enable and Alarm-in are set to
ON
, the buzzer
sounds when an external alarm is received.
2. To turn the Alarm buzzer off, press any button on the DVR front panel.
To disable the alarm buzzer:
• Set the Buzzer Enable to
OFF
to disable the alarm buzzer.
Alarm-in, Disk Full, and Video Loss are also disabled even though one of the
three functions may be set to
ON
.
System Update See “Installing a Software Update” on page 3–24.
NO
,
YES NO
Load Defaults See “Loading the Default Settings” on page 3–25.
NO
,
YES
Not
applicable
Format CF Card See “Formatting the CompactFlash Card” on page 3–
25.
NO
,
YES NO
Password See “Enabling Password Protection” on page 3–26. •
ON
,
OFF
• default password
•
OFF
• 888888
Table 3-14 System/Defaults configuration items
Menu Item Description Values Default
Figure 3-13
Alarm Buzzer menu