manualshive.com logo in svg

SEON Explorer TX8, Installation And Configuration Manual

Share
Download
SEON Explorer TX8 Installation And Configuration Manual Download Page 37

Explorer TX8

 

Installation Guide

700-0157 R001

 37

Updating the Firmware

The firmware version is displayed on the top right corner of every menu. The firmware update must be 
obtained from Seon Design. To install a firmware update, a USB memory device must be formatted by a 
Windows®-based computer using the FAT file format. Load the Program Update file onto the USB 
memory device.

To install a firmware update on the TX8:

21

Power up the DVR using the vehicle ignition.

22

Insert the USB memory device with the new firmware version into the USB port on the DVR. 

23

After the DVR has started, go to the System Settings menu > Program Update.

24

Click Update.

25

In the confirmation window, click Yes to proceed or No to cancel.

26

Once the update is finished, the DVR will automatically restart when the ignition is on.

27

Remove the USB memory device.

CAUTION: Equipment damage

Do not remove power while updating the DVR firmware. Equipment damage may result.

Figure 55

Updating DVR Firmware Dialog Box

Important:

On restarting, the DVR will take up to 3 minutes to load as it completes the upgrade process. Wait until the DVR 

finishes loading. 

Summary of Contents for Explorer TX8



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands