Introduction
700-0048 R003
1–5
1.3.2. DVR Buttons
The DVR buttons on the front panel will illuminate when the buttons are
activated. The DVR buttons perform more than one function and are described
briefly in Table 1-2.
Chapter 4, “Operating the DVR” provides detailed information on using the DVR
buttons. See “4.1.1 Using the DVR buttons” on page 4–2.
Table 1-2
Description of DVR buttons
Button
Description
POWER
With the vehicle ignition turned
OFF
and the DVR powered off, pressing the
POWER
button for 3 seconds will power up the DVR, but does not initiate recording.
With the vehicle ignition turned
OFF
and the DVR still powered up in the
RECORD
DELAY
-
OFF
interval, pressing the
POWER
button for 5 seconds will power down the
DVR immediately.
With the vehicle ignition turned
ON
, pressing the
POWER
button for 5 seconds during
the
RECORD
DELAY
-
ON
interval powers up the DVR and starts recording.
FULL
Use the
FULL
button in combination with one of the eight camera buttons (
CH
1
,
CH
2
,
CH
3
,
CH
4
,
CH
5
,
CH
6
,
CH
7
,
OR
CH
8
) and the DVR will display the selected camera in
full screen display mode.
MODE
Pressing the
MODE
button changes the display.
ZOOM
In full screen display mode, pressing the
ZOOM
button lets you zoom into the screen
2×.
DISPLAY
<
<
While the DVR is recording in live mode, different information can be displayed on
the screen.
The < button is used to navigate the menus while configuring the DVR.
CLEAR
When configuring the DVR, pressing the
CLEAR
button will load the factory default
value into the field being edited.
LOCK
>
>
Pressing the
LOCK
button enables a One-Time password option.
The > button is used to navigate the menus while configuring.
MENU
Pressing the
MENU
button enters and exits the main menu of the DVR.
REC
(
CH
1
) Pressing
the
REC
button starts the DVR recording if the DVR is not playing video or
in the menus. When the DVR is recording, the
REC
button is illuminated.
REV
.
PLAY
(
CH
2
)
During playback or when the video is stopped, press the
REV
.
PLAY
button to start
playing the video in reverse.
STOP
(
CH
3
)
Pressing the
STOP
button stops the DVR from recording or playing.
