Installation
2–6
700-0058 R001
2.4. Step 3: Installing the Cameras
If you have purchased cameras from Seon Design, install the cameras according
to the documentation that shipped with the product.
If you have cameras already installed, see “2.4.1. Checking the Camera Cable
Connections”.
2.4.1. Checking the Camera Cable Connections
The EX4 Plus 35 System uses an integrated mini-DIN connector for all of the
camera signals. The cable comes prewired into the camera, but if the cable
becomes disconnected, reattach into the terminal blocks inside the camera. See
Figure 2-4. The cable colors for correct wiring to the terminals are described in
Table 2-1. For complete camera information, see the product insert for the camera
(for example,
SA Series Wedge Camera Setup Guide
document part number 700-
0004
).
Figure 2-4
Terminal blocks in the camera
Table 2-1
Camera cable wiring
Item
Color
Description
1
Red
Power positive (+)
2
Black (and silver)
Power ground (–)
3
Green
Audio positive (+)
4
White
Audio ground (–)
5
Yellow or orange
Video positive (+)
6
Blue or brown
Video ground (–)
1
2
3
4
5
6
