v 1.0 091220
SEO CANpro shortened description
The SEO CANpro converter in combination with any car alarm or security system (e.g. SEO
PERFECT or GPS/GSM system) is an excellent car protection. It can be used to equip the car
with any additional devices such as rear camera, comfort modules, immobilizer, etc.
The device is installed according to the provided connection diagrams. The program number
appropriate for the given vehicle is indicated in each connection diagram.
The SEO CANpro converter receives digital signal from CAN BUSes and translates them into
analog signals, which are sent to the appropriate outputs, according to the general scheme. The
input analog signals are converted into appropriate commands which are sent to the vehicle via
the CAN BUS. 3 CAN BUSes can be connected to the SEO CANpro.
Thanks to advanced algorithms, SEO CANpro is able to automatically select the Program
number appropriate for a given vehicle.
The step-by-step installation procedure:
•
download SEO CANpro connection diagram from
www.can24.pro
,
•
connect the GROUND cable,
•
then c 12V,
•
set a 5-digit program number dedicated to the car, using the PCB button and LED
(see: setting the 5-digit program number); the program number can also be set using
the
O351 interface
.
•
connect CAN L,
•
connect CAN H.
ATTENTION! Do not use the power supply from the OBD port. To increase security you
could consider removing the CAN wires from the OBD connector (or connect these wires
with the use of a relay and PIN9/15 of SEO CANpro device). If you choose to do this the
garage/workshop should be informed at every visit.
The complete database of supported vehicles and associated connection diagrams can be
found at
www.can24.pro.
You will need to log in.
The connection diagram shows the program
number specific to that car as well as the buttons available for entering the PIN code and the
dashboard indicator.
The immobilizer’s microcontroller may include programs for all
declared vehicles.
Detailed description of inputs and outputs of SEO CANpro converter can be found in the
general diagram.
