R6000
Manual
– Rower – Senz Sports – R6000 – SZRT003 and SZRT004
8
5. Assembly
Place the L&R Sliding rail assembly at both side of the Pedal stat-or, and make them
align with the tapping holes, then connect them with 6pcs screws (41). Use 3 pcs
screws for each Sliding rail. Before locking, put all the screw into the holes
separately.
Keep the rower upright, lock the bottom of slide rail by 2pcs screws (41). Use 1pc
screw for each sliding rail. Before locking, put all the screws into the holes
separately.
2
