21
3-
Press the
button again. The programme will start automatically.
4-
At the end of the programme, the appliance will beep and the screen will display
« END ». Your mixture is ready to be enjoyed.
Note:
-
This programme does not have an automatic mixing function.
-
You can interrupt the operation at any time by pressing the
button. The appliance
switches to standby mode.
Keep warm mode
The « keep warm » setting is a 20-minute programme allowing previously-cooked mixtures to
be kept warm.
1-
Press the
button to switch on the appliance.
2-
Press the
button. This button will flash and 'P20' will be shown on the screen,
indicating that the operating time is 20 minutes.
3-
Press the
button again. The programme will start automatically.
4-
At the end of the programme, the appliance will beep and the screen will display
« END », indicating the cycle is completed.
Note:
-
During this programme, it is quite normal for the appliance to make a noise, blend
the food several times and small jets of steam to escape from the appliance.
-
You can also interrupt the programme at any time by pressing the
button. The
appliance switches to standby mode.
Pulse mode
The « pulse » setting allows you to blend mixtures to the extent required for a further 30
seconds without additional cooking. This setting can be used to obtain a desired consistency
or grinding almonds or hazelnuts.
1-
Press the
button and hold it down. The screen will show 'F30', to indicate that
the maximum blending time in hand-press blend mode is 30 seconds.
2-
The timer on the screen will count down. After 30 seconds the appliance will beep
and 'END' will display on the screen, indicating the cycle is completed.
Remarque
:
-
This programme does not have an automatic mixing function.
-
To stop blending at any time, simply release the button
.
Hints and tips:
