7
English
Troubleshooting
Insert the skeleton key into the key hole inside the opening for
the battery.
Turn the key to the right.
Open the door.
Your electronic-lock safe communicates by means of several audio/visual signals.
The lock automatically enters a 2-minute Delay mode after an invalid code has been entered three
consecutive times. In this mode, the lock cannot be activated and any key entry will generate an
ERROR signal.
Signals
Delay mode
2
3
4
The Problem:
Why It Is Happening:
The Solution:
Red (Error) LED + three
beeps indicates one of the
following
You have pressed Program
key out of sequence.
Verify the code and re-enter
or reprogram
You have entered an invalid
code or user pin.
Verify the code and re-enter
or reprogram
You have let 5 seconds or
more elapse between key
presses.
Lights after three consecutive
invalid codes are input
(2-minute delay mode).
Green LED only
Comes ON after you enter
a valid code and remains lit
during the 4-second period
in which the safe can be
opened.
Comes ON in the
Programming mode and
remains lit until you have
finished entering a 5-digit
code.
Yellow LED only
Yellow light comes ON
Batteries need to be
replaced.
