Located on the back of the camera are
4 (four) punch outs. Screws can be
used to either surface mount the
dome, or to attach to one of our
adapters.
Quick Reference Notes
-
Open Dome cover with included ranch.
-
Unscrew Camera plate.
-
Install Camera Plate on Camera Body.
-
Plug in all necessary cables.
-
Install Camera with Camera Plate into the Dome Case and Camera holder Arm.
-
Plug in Power.
-
Close the cover and tighten the screws.
5. POE INFORMATION
- IEEE802.3af Fully Compliant
- Compatible with IEEE802.3af PD
- PD(Powered Device) Detection, Classification
- In-rush Current Limit, Over-current Protection
- Auto-restart Fault Management
- Easy Installation
- Optional Monitoring with LED
- Input Voltage : +38~57 VDC
-
Output Voltage : DC 12±0.5V ( Max 10W )
-
B75User Port Power : DC 12 ± B730.5V ( Max 5W )
Fan : DC 12V ( 1W ) (Blowing all time)
Heater : DC 12V ( 2W ) Under +15
℃
(±5
℃
).
