Sentry TSV Installation, Operation And Maintenance Manual Download Page 4

Temperature Shut-off Valve 

 

    SPD 13.1.2 Rev. 7 

 

 

 

SENTRY EQUIPMENT CORP

 

 

• 262.567.7256 • Fax: 262.567.4523 • [email protected] • www.sentry-equip. com 

iii

 

 

SAFETY PRECAUTIONS 

Please read the entire manual before attempting to unpack, set up or operate this product. Pay careful 
attention to all warnings, cautions and notes.  Failure to do so could result in serious personal injury or 
equipment damage. 

 

Use of Hazard Information 

If multiple hazards exist, the signal word corresponding to the greatest hazard shall be used. 

 
 

Definitions 

 

 

Indicates an imminently hazardous situation, which if not avoided, will result in death or serious injury. 

 

 

Indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury. 

 

 

 

Indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. 

 

CAUTION used without the safety alert symbol indicates a potentially hazardous situation, which if not 
avoided, may result in property damage. 

 

NOTE 

Information that requires special emphasis 

 

SHALL 

This word understood to be mandatory 

 

SHOULD

  

This word understood to be advisory 

 

Summary of Contents for TSV












Reviews: