manualshive.com logo in svg

Sentry LE Series, Manual

Share
Download
Sentry LE Series Manual Download Page 50

LE/LE-HC Series DVR User Manual                                                      
V1.4                                                                                                                             October 2006 
  
 

 

                            - 49 - 

 

Note: It is important that you set up the user name and password. The user is different from 
the administrator and has access to only live videos and playback files. Use the More Users 
field to change the authorities of Internet users. Use the keyboard or mouse 
(recommended) to complete all the fields and click OK to save changes. 

 

Serial ports 

The RS232 serial ports (COM1 and COM2) are used to attach PTZ camera control cables, 
external modems, or GPIO modules to the LE/LE-HC DVR. Use the Serial Port menu to set 
parameters for the two serial ports. 

 

 

Use the keyboard or mouse to set all parameters and click OK to save changes. 
 
 
 
 
 
 
 
 
 
 
 

The user 

Summary of Contents for LE Series


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands