Copyright © 2010. All rights reserved.
2
REV122010-V28
www.SentryUS.com
Parts
1. Mechanical Exterior Code Pad Assembly
2. Hex Lug, 1” / 25mm, x2
3. Neoprene Seals, x2
4. Mechanical Interior Code Pad Assembly
5. Fixing Interior Code Pad
2 Supplied 1.4” / 36mm (2 Spare 2” / 51mm)
6. Latch Bolt Support Post
NOTE:
Before commencing installation, check that all parts are working correctly.
•
Mechanical Exterior and Interior Code Pad Assembly: Enter Factory default code C13579, turn handle in both
directions. The handle should turn and return freely under spring pressure.
•
Mechanical Deadlatch Assembly: Check that the spring latch and spindle hub moves freely.
•
If you need to change the code, you should change and test before installation.
Instructions
1) Check the hand of your door.
When viewed from the outside, your door is right handed if the hinges are on the right.
7. Spindle x3 (3” / 76mm, 3.3” / 85mm, 3.9” / 100mm -- Only
one is used)
8. Wood Screws, x4 (used with Latch Bolt & Strike Plate)
9. Latch Bolt (2 3/8” / 60mm standard)
10. Strike Plate
11. Strike Box
12. Hex Wrench
