Installation Manual
SentriLock NXT-BLE Installation Manual – 2019 v3
Page 7 of 9
4 Reassemble Lockbox
Step
Instructions
Picture
4.1
Reverse the disassembly process.
a)
Re-insert the metal Space Plate, ensuring it sits flush and
level.
b)
Re-insert the Latch Mechanism (if necessary, by pushing
the door latches in slightly to get them around the latch
supports. Use a small flat blade screwdriver to push the
latch in further, one side at a time.)
c)
Re-install the metal Security Plate and the single centre
bolt that retains the mechanism box.
Torque this fastener to 40.32 kg/cm (35 in/lbs).
4.2
a)
Carefully redress the interconnect cable into the original
position. This step is critical as cable life can only be
maintained if the cable is replaced in its original location
and configuration. Ensure the protective braid has not
slipped down the interconnect cable. There is a notch in
the bottom of the latch mechanism and the key holder
for the cable to locate in.
b)
Re-install the grey Key Holder into the lid.
