EN
Instructions for use for the user
p. 19/24
5. Commissioning
5.1. Filling the stone container
The amount of stones suited to your heater output can be found
in chapter
10. Technical data
(see page
23
).
1. Wash the stones thoroughly using water and a brush before use.
Do not use any cleaning additives.
2.
Before filling the heater with the sauna stones, check them for foreign objects
and remove any remaining packaging.
3. Place the stones in the stone container. Stack the sauna stones loosely so
that air can flow through the gaps.
4. Make sure that the sauna stones do not protrude beyond the edge of the
stone container.
WARNING!
Risk of fire due to overheating
If the sauna heater is used without sauna stones, the cabin walls will
become extremely hot. This could cause fires.
●
NEVER operate the sauna heater without the sauna stones.
5.2.
Heating for the first time
CAUTION!
Formation of smoke and odours when heating up for the first time
Materials used during the manufacturing process will be present on
the new heating elements. These evaporate when the sauna heater is
heated up for the first time. This produces smoke and an unpleasant
odour. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when
operating the sauna heater for the first
time
and if the
heating elements for the sauna heater have been replaced
.
This prevents damage to health due to the fumes and smoke produced when
heating for the first time.