Before using this unit please read these operating instructions carefully. Take special
care to follow th warnings indicated on the unit itself as well as the safety suggestions
listed below. Keep them handy for future reference.
Power source
– The unit should be connected to power supply only of the type
described in the operating instructions or as marked on the unit.
Water and Moisture
– Do not use this unit near water.
Heat
– Do not install the unit near heat sources such as radiators, stoves, heat
registers, or other appliances that produce heat.
Ventilation
– The unit should be situated so that its location or position does not
interfere with its proper ventilation.
Foreign material
– Care should be taken so that objects do not fall into liquids o r not
spilled into the unit.
Surface
– Place the unit on a flat, level surface.
Damage Requiring Service -
The unit should be serviced by qualified service
personnel when:
- The power cord or the plug has been damaged: or
- Object have fallen or liquid has been spilled into the unit: or
- The unit has been exposed to rain: or
- The unit dos not appear to operate normally or exhibits a marked change
in performance: or
- The unit has been dropped. Or the enclosure damaged.
Replacement Parts
– Use only manufacturer specified parts. Unauthorized
substitutions may result in fire, electric shock or other hazards.
Service
– The user should not attempt to service the unit beyond that des cribed in
the operating instructions. All other servicing should be refferred to an authorized
service personnel.
Safety Precautions
Warning
: This Rear View Camera is to be used with, not instead of, other viewing
aids in your vehicle such as front, rear, and side mirrors. Safe driving practices,
alertness, and visual and physical fitness are prerequisites for your driving safety.
The Manufacturer shall not be held liable for any accidents which may occur while
operating this system
.
Caution
!
Before making any connections, disconnect the ground
terminal from the battery to avoid a short circuit.
The plugs should be full inserted into the connectors or
jack. A loose connection may cause a malfunction with
the unit
-1-
