Monitor Vitals (Connect to Tablet)
Thermometer
Daily Check
Note:
If Lead I signal is small, use Lead II for both
calibration and Daily Check measure.
21100 W. Capitol Drive #6
Brookfield, WI 53072
www.SentierConnect.com
On the tablet, choose the Vetcorder to pair. The last
4 digits of the Vetcorder’s serial number can be
found on the back of the Vetcorder.
4
1
Install “Vetcorder Minimonitor” from App
Store or Google Play on Tablet (must
have Bluetooth 4.0 or above)
2
Connect vital monitor cable
to Vetcorder
3
Touch the “Monitor Vitals” icon on the Vetcorder.
At the same time, open the “Vetcorder
Minimonitor” App on your tablet.
Note:
•
Make sure Tablet supports Bluetooth 4.0 or above.
•
Use code 8888 the first time you pair a Vetcorder
1
Touch the “Thermometer” icon.
2
Place sensor in ear
3
Click home button, and hold for around 3 seconds
until you hear a long “Bi” beep.
4
Take down the device, and the screen shows the
measurement result.
1
Touch the “Daily Check” icon
3
Connect ECG Clips and SpO2
Sensor and keep animal still.
2
Choose Pet or press “+” to create a new file
4
Once the signal is stable, a 10-second reading will
be taken and stored. Summary results will display
upon completion of the reading.
5
After connection, waveform and data will display on
both Vetcorder and Tablet.