www.sentera.eu
MIW-DXTP-EN-000 - 29 / 09 / 2015
10 - 10
VERIFICATION OF INSTALLATION INSTRUCTIONS
Check if both LEDs (LEDTX and LEDRX) blink after you switch on your unit.
(see
Fig. 7
Communication detection indication
) If they do, your unit has detected
Modbus network. If they do not, check the connections again.
Fig. 7 Communication detection indication
ATTENTION
The status of both LEDs (LEDTX and LEDRX) can be checked only when the unit
is energised. Take the relevant safety measures!
TRANSPORT AND STOCK KEEPING INFORMATION
Avoid shocks and extreme conditions; stock in original packing.
WARRANTY INFORMATION AND RESTRICTIONS
Two years from the delivery date against defects in manufacturing. Any modifications
or alterations to the product after the date of publication relieve the manufacturer
of any responsibilities. The manufacturer bears no responsibility for any misprints or
mistakes in this data.
MAINTENANCE
In normal conditions this product is maintenance-free. If soiled, clean with a dry or
dampish cloth. In case of heavy pollution, clean with a non-aggressive product. In
these circumstances the unit should be disconnected from the supply. Pay attention
that no fluids enter the unit. Only reconnect it to the supply when it is completely dry.
DXTP
DUCT TEMPERATURE CONTROLLER
WITH PI CONTROL
