manualshive.com logo in svg

Sensys Networks MicroRadar VSN240-MP, Installation & Quick Start Manual, Page: 1 / 4

Share
Download
Sensys Networks MicroRadar VSN240-MP Installation & Quick Start Manual Download Page 1

1608 4th Street Suite 200 Berkeley CA 94710| [email protected] | P 510.548.4620 F 510.548.8264 

1608 4th Street Suite 200 Berkeley CA 94710

|

 [email protected]

|

 P 510.548.4620 F 510.548.8264 

VSN240-MP MicroRadar

TM

 Sensor Installation Quick Start Guide (Parking)

Pre-Installation: 

Suggested VSN240-MP configurations for parking

1

Summary of Contents for MicroRadar VSN240-MP

Page 1: ...m P 510 548 4620 F 510 548 8264 1608 4th Street Suite 200 Berkeley CA 94710 parking sensysnetworks com P 510 548 4620 F 510 548 8264 VSN240 MP MicroRadarTM Sensor Installation Quick Start Guide Parking Pre Installation Suggested VSN240 MP configurations for parking 1 ...

Page 2: ...48 8264 Configure Parking Sensors Select an IP Address from the list of access points and click Connect Connect to Access Point Click the TrafficDOT icon to start the configuration program Run TrafficDOT 2 VSN240 MP Installation Quick Start Guide Parking From the Main window select a MicroRadar sensor from the tray The Sensor Configuration Panel displays on the left Select MicroRadar Sensor ...

Page 3: ... Set Detection Range From the Cmds window 1 Select µD Parking from the Change Mode To drop down list 2 Click Set Mode Select Sensor Mode The recommended Adv settings for parking detection are Alternate Sample Rate Disabled Current Sample Rate 1 Hz Note The default Alternate Sample Rate for µD Parking is 1 Hz Detection Distance 6 Feet or 10 Feet Note Do not use 4 Feet for parking detection Autobase...

Page 4: ...g Ensure sensor label is visible and record sensor number Note The clips on the sensor shell prevent the sensor from floating in the epoxy MicroRadar Sensor Core hole 4 diameter 2 1 2 depth Core Vacuum or brush hole clear of debris Ensure hole is dry Clear Debris from Hole Fill hole with epoxy Level to road surface Apply Final Epoxy Allow 5 10 minutes to cure Once the epoxy is dry remove the hangi...

Reviews:

No comments