12
Getting started
1. Untie the main cord.
2. Remove the top cover from the device.
3. Fill the bowl with approximately 1 liter of cold water until the water level is between the
maximum and minimum mark (see illustration). Ensure, that you do not
fi
ll the bowl beyond
the maximum mark. Do not use hot or boiling water.
4. Add 3 or 4 drops of your favourite aromatherapy Oil, or more if preferred. However, for
fi
rst-time user or if the device is used in a small enclosed area, it’s recommended that only
2 or 3 drops be added initially and then increased by another 1 or 2 drops about 30 minutes
later. Then you has become comfortable with the fragrance.
5. Replace the top cover, insert the plug of the device into a properly installed socket and
switch on the device (On/Off-Switch on the back side).
6. Press the button (see illustration) repeatedly until you get the colour you want. Choose
between individual lights and various colour combinations.
• As the water is absorbing impurities in the air, it’s recommended that the water be
replaced every 24-48 hours, depending on the condition of the water.
• If the water level is below the minimum mark, please re
fi
ll immediately an
adequate amount of water. Unplug afore the device.
• The fragrance will last for about 4-6 hours. The deodorizing, anti-bacterial, anti-
fungal effects will continue even for approx. 24 hours, as long as the device is
switched on.
Maximum mark (MAX)
Water level
Minimum mark (MIN)
Button