SU320CSX
4110-0446, Rev. C
Page 33 of 96
© 2017 UTC
Aerospace Systems
Date Printed: 3-Jan-2017
This document does not contain any export controlled technical data.
5.5.9.
Update Existing Operational Configuration
Description
Takes the Current Session operational setting and saves it to the
User Configuration memory in the selected OPR slot. This
command is only required when users require custom OPR settings.
Setting Type
N/A
Command
OPR:UPDATE
Parameters
none
Return Values
none
Range
Type
Example
OPR:UPDATE
5.5.10.
Delete Last Operational Configuration
Description
Deletes the last, or highest slot number, operational configuration
slot from the User Configuration memory. This operation will only
delete operational configuration slots created by the user, and will
return an error if executed when only factory operational
configuration slots exist. If the Current Session Configuration is the
last operational configuration when this command is issued, a
subsequent query of the current operational configuration number
will return the deleted operational configuration number, since it is
still the Current Session Configuration, but a command to load the
deleted operational number will error. WARNING: If the startup
operational configuration slot is deleted, the camera startup
operation is no longer specified. Use the OPR:START followed by
the CONFIG:SAVE commands to reselect an existing operational
configuration slot if the startup operational configuration slot is
deleted.
Setting Type
N/A
Command
OPR:DEL
Parameters
none
Return Values
none
Range
Type
Example
OPR:DEL
5.5.11.
Delete All Operational Configurations
Description
Deletes all operational configuration slots created by the user from
