Sensors & Software pulseEKKO, Product Manual

Page: 152 / 251

Collecting Data
140
Figure 7-6: Skipped traces shown in red at bottom of screen
Figure 7-7: Warning message when more than 10% of traces are skipped
If the stacking option was set to DynaQ and the Trigger is set to Odometer , you will see a colored
bar at the bottom of the screen. In most situations, moving the system at a comfortable walking
speed generates data of good quality. In situations where target resolution or maximum
penetration depth is critical, moving slower increases data quality.
As the Line Scan data scrolls on the screen, the DynaQ Index Bar is displayed along the bottom
of the screen (Figure 7-5). The color of the bar indicates the quality of the data at that point
along the line: