Sensors & Software LMX200 Series, User Manual

Page: 87 / 133

MapView
87
9 MapView
MapView is a unique feature that allows the user to graphically view the path travelled by the
system, and any flags or interpretations made. This is helpful in determining the linearity and
consistency of buried objects. It will also display depth slices from a grid collection.
A common use of this feature is to snake back and forth over a given area. Each time you cross
a target producing a hyperbola, click on the top of the hyperbola to add an interpretation. If the
object is a linear feature, all the interpretations will line up when viewed in MapView.
MapView only works if GPS data is collected with the GPR data. This is what allows the lines
and/or grids to be positioned correctly (with the right orientation).
If you use the internal GPS, only grid data will be shown in MapView. If an external GPS is
connected, both line and grid data will be shown.
9.1 Accessing MapView
MapView can be accessed the following ways:
•
From the main screen. Remember that in the Enhanced configuration, MapView is
project based, meaning it will display all lines and grids that are present in a given
project.
Figure 9-1: Accessing MapView from the main screen: a) LMX200 on left and b) LMX200 Enhanced on right
•
From the Line Scan screen, using the SplitView features. Details of SplitView are
explained in Section 6.6.