Sensors & Software LMX200 Series, User Manual

Page: 81 / 133

SliceView
81
8 SliceView
SliceView displays data collected in a grid as a series of depth slices moving deeper into the
subsurface. Objects and features appear in plan view, which can be an easier way of
visualizing the data.
Upon entering SliceView, the screen will be displayed as shown in Figure 8-1.
Figure 8-1: SliceView screen
The right half of the screen shows one of the depth slices. These slices are 10cm or 4” thick.
The top and right sides of this image show the dimensions of the grid while the left and bottom
sides show the line numbers.
The left half of the screen displays one of the grid lines, and any flags or interpretations that
were made. The shaded area in between the horizontal red lines corresponds to the depth slice
shown on the right. To move to another grid line, use the 4-way directional keypad on the
Display Unit.
At the top of the screen, the grid number is listed, along with the Soil Cal value and slice
thickness range.
The button functionality is explained below:
8.1 Depth
Pressing the + and - buttons on the Depth button will increase or decrease the depth of the
depth slice currently displayed. You can also drag the depth slice indicator on the line scan
image. This allows
the user to “slice through” the ground, and locate features that appear at
different depths.
Depth
Slice
Line Scan
Depth slice
range
Soil Cal
Line
number
displayed
Depth
Slice
Indicator