Sensors & Software LMX200 Series, User Manual

Page: 71 / 133

Grid Scan
71
7 Grid Scan
Grid scans are conducted to generate depth slices over a given area. This is useful for locating
all known and unknown objects, as well as their orientation, in a graphical manner that is easy
to interpret.
From the main menu (either in Figure 3-2 or Figure 3-3), press the Grid Scan button to enter
the Grid setup menu.
7.1 Grid Parameters
The screen in Figure 7-1 will allow you to set parameters for the grid, before data acquisition
begins.
Figure 7-1: Grid Scan setup, from the Enhanced system. On the standard LMX200, it will be the same, except there
will not be a project number
7.1.1 Grid Number
To select a grid number, press the + and - buttons under Grid Number at the bottom of the
screen. Alternatively, pressing the grid number button itself will show the screen in Figure 7-2.
From here, you can go directly to any grid. Grids that contain no data will have the text shown in
green.
If a grid already contains some data, it will be shown in red and you will not be able to change
the size or resolution. You will just have the option to select:
•
SliceView
– view the depth slices
•
Delete Grid
– delete all the data in this grid