Sensors & Software CONQUEST 100, User Manual

Page: 61 / 143

Conquest 100 Tools & Setup
51
5.2.1 System Information
System Information is the only option in System Test which is not actually a test. Here
information such as the version, serial numbers, temperature and battery power are displayed
(Figure 5-17).
Figure 5-17: System Information screen
There are two options at the bottom of this screen:
•
Export - If a USB key is currently inserted, pressing Export will export the System Log
and Summary Files only
•
Anonymous Usage Statistics - When this is set to ON and the user is connected to a
wireless network, any system malfunctions will trigger an automatic notification to
Sensors & Software. This is to help with gathering information about any system
irregularities. As the name suggests, the notification is completely anonymous and no
personal information is sent.
5.2.2 Touch Screen
The test checks proper operation of the touch screen (Figure 5-18). It allows you to test the
screen (by pressing
Test ) or perform a quick calibration followed by a test (by pressing
Calibrate ). Both involve touching targets on the screen in the allotted time.