HOOK & LOOP
FASTENER
Dashboard – with Power Cord
(use Hook & Loop Fastener)
VISOR BRACKET
QUICK GUIDE
1. Mount the radar detector directly onto the
dashboard using the hook & loop fastener
(with sticky sides attached to the dashboard
and bottom of radar detector).
2. Plug the power cord into the radar detector
and power socket of your vehicle.
Visor – with Power Cord (use Visor Bracket)
1. Clip visor bracket to the back, pivoting edge
of your visor.
2. Turn the radar detector upside-down and
attach to the visor clip – you will hear a
“click” when properly connected.
3. Attach the power cord to the radar detector.
4. Turn on the unit.
5. Press and hold the MUTE and ALERT FILTER
buttons simultaneously for 3 seconds to
reverse the text display (so messages will
be seen right-side-up).
6. Use the retaining clips to neatly tuck away
the power cord.
When you use bracket A or bracket B, make sure the suction cups pull-tabs are not
positioned underneath the bracket, so they can be easily accessed for removal.
2
