Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
UK
+44(0)118 976 9023
+44(0)118 976 9020
www.sensormetrix.co.uk
sales
fax
email
web
A member of the Olancha Group Ltd
Registered in England No. 4004881
VAT Registration No. GB164 5653 45
3
Argon 100
Hardware User Manual
Rev 1.2
Introduction
The Argon alert and monitoring solution allows the user to pre-set a temperature
range and receive an alert (via SMS, phone call, email or server script) if the
current temperature exceeds the pre-set range. It is also possible to read the
current temperature.
An email/http log is also supported. Temperature logs can be recorded at
predetermined intervals and sent to a valid email address when required.
The Argon software can be controlled in two ways:
1. Via the use of SMS command messages. These are standard text messages
sent from a mobile phone which are formatted in a specific way to configure
the software (i.e. change GPRS settings)
2.
Via a Windows compatible based configuration tool (USB to serial driver and
Microsoft .NET framework required – ensure Windows has latest service pack
installed on your computer).
The Argon software is designed to operate only with Sensormetrix temperature
1-wire sensor(s) in conjunction with Serial RS232 Proton-1 Temperature adapter.
(Included in Argon kit).
Functions
•
Remote temperature reporting of site equipment
•
Logging of temperature data in remote locations via email/HTTP post (see
note)
• Over/under temperature alarm notification via SMS and phone call (DTMF alert
tone), HTTP post alert and email.
•
Instantaneous temperature reading via status SMS
Note: HTTP post support allows integration of logs and alerts from the unit to
existing server side reporting / management applications.
Features
• Global Quad Band GSM/GPRS Engine
•
External GSM Antenna for increased performance
