SensorLink 910 EURO Operator'S Manual Download Page 19

Page 19

SensorLink  Corporation 

Warranty

SensorLink Corporation warrants each instrument it man u fac tures to be free from 
defects in materials and workmanship under nor mal use and service for the period of 
one year after date of ship ment. Within this period, SensorLink Corporation agrees 
to re pair or replace, at SensorLink Corporation’s option, any instrument that fails to 
perform as specifi ed. This Warranty shall not apply to any in stru ment that has been:

Repaired, worked on, or altered, including removal of the front panel, by persons 
un au tho rized by SensorLink Corporation in such a manner as to injure, in 
SensorLink Corporation’s sole judg ment, the per for mance, sta bil i ty, or reliability 
of  the in stru ment;

2 Sub 

ject ed to misuse, negligence, or accident; or

Connected, installed, adjusted, or used otherwise than in ac cor dance with the 
instructions furnished by SensorLink Corporation.

This Warranty is in lieu of any other warranty, expressed or implied. SensorLink 
Corporation reserves the right to make any chang es in the design or construction 
of its in stru ments at any time, with out incurring any obligation to make any change 
what ev er in units previously de liv ered.

If a failure occurs, contact the manufacturer for a Return Authorization and 
instructions for return shipment. This war ran ty con sti tutes the full understanding of  
the man u fac tur er and buy er, and no terms, conditions, understanding, or agree ment 
pur port ing to modify or vary the terms hereof shall be binding unless here af ter made 
in writing and signed by an authorized offi cial of SensorLink Corporation.

Summary of Contents for 910 EURO





















Reviews: