2 of 2
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com © 2020-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 0
4
/
18
/202
2
912-00148-00
3
SPODMRA JOT
Dimming Switchpod
Installation Instructions
Clarity
+
Apple
Mobile App
Clarity
+
Quick Start
Guide (JOT)
A
PP FREE TRINING VIDEOS
Be
havior zones, daylight harvesting and Microphonics™
JOT SWITCH SETTING
ACTION and LED RESPONSE
Occupancy Time Delay
The time an occupancy sensor will keep the lights on after last detection.
ACTION:
1) Insert JOT Tool.
2) Press any front button 2-times to enter time delay setting code.
LED Observance:
LED will blink back current setting if no additional input is given. This is done 3-times.
ACTION:
1) At any point, while displaying current setting, press any front button to set value.
LED Observance:
LED will blink back new setting. This is done 3-times.
Occupancy Start Level
Level of light output when occupancy is initially detected.
ACTION:
1) Insert JOT Tool:
2) Press any front button 3-times to desired occupied brightness start level setting code.
LED Observance:
LED will blink back current setting if no additional input in given, This is done 3-times.
ACTION:
1) At any point, while displaying current setting, press any front button to set value.
LED Observance:
LED will blink back new setting. This is done 3-times.
On Mode
Change between Occupancy and Manual On Modes.
ACTION:
1) Insert JOT Tool.
2) Press any front button 4-
ti
mes to set operation mode setting code.
LED Observance:
LED will blink back current setting if no additional input in given, This is done 3-times.
ACTION:
1) At any point, while displaying current setting, press any front button to set value.
LED Observance:
LED will blink back new setting. This is done 3-times.
High Trim Setting
ACTION:
1) Insert desired settings.
2) Press any front button 5 times.
LED will blink back new settings. This is done 3 times.
Join Group
Add new wall switch device to app_less group; used in 3_way setup.
ACTION:
1) Insert JOT Tool into the switch that will be joining an app-lessly paired group:
2) Press any front button 6-times to enter setting option.
LED Observance:
½ Second On, ½ Second Off, followed by rapid flash. NOTE: TIMEOUT 5-7 minutes.
Accept New Device
Accept new switch (per join above) into group; used in 3_way setup.
WARNING
: Do not app-less pair a nearby space when using this function
ACTION:
1) Insert JOT Tool into the switch that pairing app-less group:
2) Press any front button 7-times to enter setting option.
LED Observance:
LED will blink back setting entry followed by a rapid flash. NOTE: TIMEOUT 5-7 minutes
Add Mobile Device
Show app_less formed group and allow mobile device to join group.
WARNING
: Do not app-less pair a nearby space when using this function
ACTION:
1) Insert JOT Tool into app-lessly pairing wall switch:
2) Press any front button 8-times to enter setting option.
LED Observance:
½ Second On, ½ Second Off, ½ Second On, ½ Second Off. NOTE: TIMEOUT 5-7 minutes.
Reset PIN
If PIN in lost used to create new PIN.
ACTION:
1) Insert JOT Tool:
2) Press any front button 9-times to enter reset PIN option.
LED Observance:
½ Second On, ½ Second Off, ½ Second On, ½ Second Off. NOTE: TIMEOUT 5-7 minutes.
Remove Local Device Only
Used to remove local 3_way Switch.
Note: Removing switch used to form group will delete entire group.
ACTION:
1) Insert JOT Tool.
2) Press any front button 10-times to enter remove local device setting option.
(a.) 1-press = do not remove (b.) 2- presses = Remove device.
LED Observance:
LED will blink back current setting if no additional input is given. This is done 3-times..
Delete Group
Used to return all devices back to default state.
ACTION:
1) Insert JOT Tool.
2) Press any front button 11-times to enter delete group setting option.
(a.) 1-press = do not remove (b.) 2- presses = Remove device.
LED Observance:
LED will blink back current setting if no additional input is given. This is done 3-times..
Low Trim Setting
ACTION:
1) Insert desired settings.
2) Press any front button 12 times.
LED will blink back new settings. This is done 3 times.
ACTION:
1)
While blink back confirmation is occuring from prior action.
2)
Insert desired settings value
.
LED will blink back new settings. This is done 3 times.
ACTION:
1)
While blink back confirmation is occuring from prior action
.
2)
Insert desired settings value
.
LED will blink back new settings. This is done 3 times.
LED RESPONSE
App-Free
High Trim Setting
App-Free
Pairing Multiple
Room
App-Free
Pairing Options
App-Free
Pairing and
Visual Feedback
A
DVANCED BEHAVIOR SETTINGS
Clarity
+
A
ndroid
Mobile App
