Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2014 Acuity Brands Lighting, Inc. All rights reserved 09/19/14 IS-CM-WR-003
1 of 2
Wireless Battery Powered
Sensor Instructions
PASSIVE INFRARED (PIR) & DUAL TECHNOLOGY (PDT)
MODEL NUMBERS
CM 9 WR:
Passive Infrared (PIR) Detection - Small Motion 360º
CM 10 WR:
Passive Infrared (PIR) Detection - Large Motion 360º
CM PDT 9 WR:
Dual Tech (PIR + Microphonics
TM
) Detection - Small Motion 360º
CM PDT 10 WR:
Dual Tech (PIR + Microphonics
TM
) Detection - Large Motion 360º
SPECIFICATIONS
SIZE: 4.5” Diameter (11.56 cm)
2.39” Deep (6.07 cm)
WEIGHT: 6 oz
MOUNTING: Ceiling Surface
3.5” Octagon Box
Single Gang Handy Box
COLOR: White
SILICONE FREE / ROHS COMPLIANT
WIRELESS FREQUENCY: 902 MHz (RDT™)
OPERATING TEMP
Standard: -4º to 122º F (-20º to 50º C)
Dual Tech (PDT): 25º to 122º F (-4º to 50º C)
RELATIVE HUMIDITY:
20 to 75% non-condensing
EXPECTED BATTERY LIFE:
~10 years (at factory defaults)
BATTERY TYPE: AA Lithium 1.5V, 3000 mAH
Note: Using replacement batteries
with capacity of <3000 mAh will result in
shorter battery life.
0 ft
9
0 m
2.7
28 21 14 7 0 ft 7 14 21 28
8.5 6.4 4.3 2.1 0 m 2.1 4.3 6.4 8.5
SIDE VIEW
TOP VIEW
28
14
0 ft
14
28
8.5
4.3
0 m
4.3
8.5
0 ft
9
0 m
2.7
28 21 14 7 0 ft 7 14 21 28
8.5 6.4 4.3 2.1 0 m 2.1 4.3 6.4 8.5
SIDE VIEW
TOP VIEW
28
14
0 ft
14
28
8.5
4.3
0 m
4.3
8.5
•
Large motion (e.g. walking) detection in a 360º coverage pattern around sensor
•
Provides 24 ft (7.32 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling
•
7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft (4.88 to 10.97 m) radial coverage
•
Passive Dual Technology (also called Microphonics™) provides overlapping detection of sounds from human activity
over the complete PIR coverage area. Advanced filtering is utilized to prevent non-occupant noises from keeping the
lights on.
LARGE MOTION 360º
(model #s: CM 10 WR / CM PDT 10 WR)
Note: Sensor’s screw axis
is offset 7.5º from a long
detection segment
COVERAGE PATTERNS
0 ft
9
0 m
2.7
SIDE VIEW
TOP VIEW
12
6
0 ft
6
12
3.7
1.8
0 m
1.8
3.7
12 6 0 ft
6
12
3.7 1.8 0 m
1.8
3.7
SMALL MOTION 360º
(model #s: CM 9 WR / CM PDT 9 WR)
Note: Sensor’s screw axis is
aligned with a long detection
segment
0 ft
9
0 m
2.7
SIDE VIEW
TOP VIEW
12
6
0 ft
6
12
3.7
1.8
0 m
1.8
3.7
12 6 0 ft
6
12
3.7 1.8 0 m
1.8
3.7
•
Small motion (e.g. hand movements) and large motion detection in a 360º coverage pattern around sensor
•
Provides 12 ft (3.66 m) radial coverage when mounted to standard 9 ft (2.74 m) ceiling
•
8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20 ft (3.05 to 6.10 m) radial coverage
•
Passive Dual Technology (also called Microphonics™) provides overlapping detection of sounds from human activity
over the complete PIR coverage area. Advanced filtering is utilized to prevent non-occupant noises from keeping the
lights on.
1. Screw battery extension ring to ceiling
using included pointed tip screws (qty 2)
2. Install batteries (qty 2)
INSTALLATION INSTRUCTIONS
3. Plug battery connector cable
into back of sensor
4. Screw sensor to battery extension ring
using included flat tipped screws (qty 2)
AA Lithium
AA Lithium
Note: Install decorative sensor lid by pushing up and rotating clockwise.
Note: A low battery status warning is indicated by paired SPODMR WR
switches/load controllers. See switch instructions for details.
Scan QR code to access
video demonstrations:
EXAMPLE APPLICATION DIAGRAM
ON
OFF
LOA
D
Line Powered Wireless Switch
& Load Controller
Battery Powered
Wireless Sensor(s)
(Model #: SPODMR WR)
H
GND
(Model #: CM xx WR)
BLK
BLK
WIRELESS RANGE GUIDELINES
Line of Sight: >100 ft (31 m); e.g. corridor
Plasterboard / Dry Wood: 98 ft (30 m), max 5 walls
Concrete Walls / Ceiling: 32 ft (10 m), max 1 wall/ceiling
http://bit.ly/1aszSqd
Note:
Avoid locating a Dual Tech sensor in close proximity to the switch, as the sound of the relay could trigger the sensor back on. If the load always cycles immediately back on after
turning off, the problem can be remedied by: 1) moving the sensor further from the
SPODMR WR
, or 2) setting the Occupancy Time Delay to value 14, which will disable the microphone.